An easy to use, single component, bitumen and acrylic based, durable and elastic waterproofing coat which have very good resistance to de-icing salts, plants roots and aggressive substance in soil.
Usage areas:
The product is a blend of bitumen and acrylic rubber based chemical, specially formulated for use on concrete structure that are in permanents contact with soil and those which are the area of use: Building’s foundations. Basements, Retaining walls, Roofs of the building, Balconies and terraces, Wet areas such as bathrooms and kitchens and toilets as a protective coating. On shear walls and all types of concrete surfaces in contact with soil against moisture and low degree chemicals.
Application Details:
All surfaces (new or old) must be clean, dry and free from grease and oil, laitance, curing compounds, form board release agents and any other contaminants which may impair adhesion of the product. Remove any residual paint with paint stripper, scraping, grinding and/or sand blasting to achieve a clean surface , for new concrete surfaces must have “cured” for at least 28 days and should be porous, and of a light broom finish to ensure maximum adhesion between base coat and concrete. Diamond disk grinding is necessary and use the surface should be sealed with suitable primer.
Application prohibitions:
– Newly applied material should not be exposed to rain and frost for 24 hours.
– Thickness should be at least 1mm in applications that will be exposed to sunlight – It should not be used in rainy and fog weather under + 5 °
