It is a polymer based, one component waterproofing coating that forms a waterproof impermeable insulation layer on the surfaces it is applied. The product have high adhesion to the surface, easy to apply, it have high resistance to corrosion and chemicals, it have very good resistant to acids, petroleum products, water and solvents. High mechanical resistance to abrasion and impact. It is not affected by fungi and bacteria. The product is UV resistance. It is resistant to salt water, grease and oil and is also impermeable.
Usage areas:
Waterproofing of terrace roof and balconies, metal roofs, woods, and old bituminous problematic insulation’s, asphalt and concrete floors, under ceramic waterproofing, wet areas (bath, WC, shower, kitchen), Prefabricated concrete, painted sheet, galvanized sheet, GRP water streams as waterproofing layer
Application Details:
Concrete surfaces should be clean, sound and free from oil, grease, cement laitance and all loosely adhering particles. Application surfaces are primed with Hayparoof plus thinned with 30-50% water directly. After four hours one coat is applied without thinning. And another coat is applied after four hours. The application of each layer should be perpendicular to the previous one, and should be completed at one time.
Application prohibitions:
- Avoid application in temperatures below +5°C and above +35°C.
- Avoid application on frozen areas, on areas under risk of freezing in 24 hours or on areas open to direct sunlight or wind.
