It is a long-lasting exterior coating material with 400% flexibility, modified with special acrylic and synthetic resins. It adheres perfectly to all kinds of surfaces and fills in the hairline cracks on the surface. Thanks to its elasticity, it shows high resistance to different works of structures. It is resistant to harsh conditions such as hot, cold, sea water and industrial atmosphere. It has excellent UV resistance.
PRODUCT DESCRIPTION
- It is a material that maintains its elasticity even at low temperatures, with its elasticity it bridges cracks in the infrastructure and is not affected by the movements occurring during the building.
- It is completely waterproof and provides full protection against rain; It prevents salt spills, frost cracks, mold, fungus formation and chemical corrosion on the wall and reduces heat loss.
- It provides the buildings to breathe with the ability to exhaust the moisture formed inside.
- It is resistant to alkali.
- It is not affected by heavy weather conditions such as rain, snow, humidity, extreme cold or hot, does not swell, crack and fade.
- It has superior hiding power.
- It does not smell because it does not contain solvent and diluted with water, it does not harm human and environmental health.
USAGE AREAS
- Exterior
- On plastered surfaces,
- On concrete surfaces,
- Mineral surfaces such as cement boards
- It is applied on old painted surfaces.
APPLICATION DETAILS
- Layers that reduce adherence such as oil, grease, dirt, paint, cement grout, rust, mold oil, salt vomiting should be thoroughly cleaned before applying.
- Surfaces must be clean, strong, free of carriers and free particles.
- Cracks and fractures on the surface should be repaired carefully with Repair Mortar and the surface should be prepared.
- Primer application should be started after the surface is ready.
- Acrylic primer or thinning should be done by thinning the product itself.
APPLICATION PROHIBITIONS
- Application Temperature: (+ 5 ° C) – (+ 35 ° C)
- Drying Time: 6 hours to dry for application.
- Full dry: 24 hours
- Lower temperature and higher relative humidity prolongs the drying time.
- Consumption: Depending on the roughness and absorbency of the surface, an average of 0.35-0.5 lt / m² in a single coat.
- Application Tools: Brush, roller, spray gun
