It is a two component chemically curing aliphatic acrylic polyurethane coating designed to be painted in swimming pools. It has a glossy finish with very good gloss retention. To be used as topcoat in atmospheric environments. The product is not affected by water or water pressure. The Product is UV resistance and have very good resistance against alkali and chloride.
Usage areas:
In swimming pools and water tanks. For metal water tanks. For water channels, dams, and ponds. In water treatment tanks.
Application Details:
For Concrete surfaces: All surfaces (new or old) must be clean, dry and free from grease and oil, laitance, curing compounds, form board release agents and any other contaminants which may impair adhesion of the product. Remove any residual paint with paint stripper, scraping, grinding and/or sand blasting to achieve a clean surface , for new concrete surfaces must have “cured” for at least 28 days and should be porous, and of a light broom finish to ensure maximum adhesion between base coat and concrete. Diamond disk grinding is necessary and use the surface should be sealed with suitable primer.
Over Ceramic surfaces: the surface of ceramic must be clean, dry and free from oils or grease.
Application prohibitions:
- Avoid application in temperatures below +5°C and above +35°C.
- Avoid application on frozen areas, on areas under risk of freezing in 24 hours or on areas open to direct sunlight or wind.
