Is a high strength, pumping suitable, free flow precision non-shrink cementitious grout. It can be used for heavy-duty support and bearing. It contains no chloride or other substances, which could aggravate corrosion of reinforcing steel or pre-stressing steel cables. It can also be used for heavy duty anchoring. The product can be pumped when large volume is needed. It requires only the addition of water to produce an easily applied free flowing grout. It can also be applied as a trowel able or dry pack material.
Usage areas:
- Free flow precision grouting.
- Filling gaps of pre-cast and pre-stressed panels.
- Heavy-duty support beneath machine base plates, bridge bearings and crane rails.
- Heavy duty anchoring including bolts, starter bars and tendons in drilled holes.
- Fill in grout for hollow block walls.
- Concrete anchors, rail beds and machine foundation.
- Machinery bases.
- Concrete – poured in place, precast, tilt-up and prestressed.
- Column bases.
Features:
– Non-shrink.
– High strength.
– Non-corrosive will not attack reinforcement.
– Pump able for easy placement.
– Interior/exterior.
– Combines high fluidity, excellent working time and early strength build insuring quick job startups, thereby reducing costs.
– Non-porous, high density grout resistant to water and salt penetration and damage from freeze/thaw cycles.
– Non-metallic, non-staining and non-corrosive.
– Contains no chlorides or other salts detrimental to reinforcing steel.
– Pre-mixed and ready-to-use : requires only addition of water.
Application details:
The mixed product must be applied onto the primed surface before it dries. Areas, which dry too soon, must be scrubbed clean and re primed exactly as described above before continuing. Apply the mixed product onto the primed substrate as soon as possible after mixing. The mortar should be applied evenly by trowel and tamped in place with a wood float to ensure full compaction. Thoroughly compact the mortar around any exposed steel reinforcement. Hayper Flexible Mortar can be applied up to 40 mm thickness in single applications.
