POOL PAINT
Pool Paint: is a two component chemically curing aliphatic acrylic polyurethane coating designed to be painted in swimming pools. It has a glossy finish with very good gloss retention. To be used as topcoat in atmospheric environments. The product is not affected by water or water pressure. The Product is UV resistance and have very good resistance against alkali and chloride.
PU BASED COATING 1K
PU BASED COATING 1K: is a polyurethane based, single component, ready to use, UV stable, walkable, solvent based coating and waterproofing material. It is cured with moisture in the air and forms a quite elastic and durable film which perfectly adhering to different surfaces. It has excellent mechanical and chemical characteristics providing high tension, tearing and wearing resistance. It is effective in water vapour transmission. The film is capable of breathing and it prevents the accumulation of humidity on the lower layer. The product have very good crack bridging characterises.
PU FLEX PRIMER 2K
PU Flex Primer 2K: is a polyurethane based, two component, solvent free coating that designed as primer for concrete and cement based surfaces. It is specially designed for humid or wet concrete
surfaces (at least 7 days old). It provides fast curing and toxic free surface, as well as being solvent-free (zero VOC/Volatile Organic Components).
PU FOAM INJECTION
PU Foam Injection: is a single component, Solvent Free, polyurethane based injection material, specifically designed for sealing and waterproofing the joints and cracks in concrete subjected to structural movements. The single component system reacts with water to form foam that expands filling the void and forming a tight, impermeable elastomeric seal, stopping the water flow.
PUR BITUMEN 1K
PUR Bitumen 1K: is a single component, bitumen modified polyurethane-based liquid waterproofing material. It is cured with moisture in the air and forms a quite elastic and durable film which perfectly adhering to different surfaces. It has excellent mechanical and chemical characteristics providing high tension, tearing and wearing resistance. It is effective in water vapour transmission. The film is capable of breathing and prevents the accumulation of humidity on the lower layer. It is capable of bridging shrinkage cracks thanks to its elasticity. Product only contains pure elastomeric, hydrophobic polyurethane resin and special inorganic admixture materials. It is easy to use.
PUR BITUMEN 2K
PUR BITUMEN 2K: is a two component, polyurethane-bitumen modified, liquid waterproofing material. It is a fast curing product and it forms a very elastic film, which perfectly adhere to different
surfaces. It is perfectly adhesive to almost all types of surfaces. It has excellent mechanical characteristics providing high tension, tearing and wearing resistance. It has excellent chemical
resistance. Moreover, does not affected by water vapor transmission. The dry film of the product has the capability to breath and prevents the accumulation of humidity under the coat. It provides thick coating without bubbling. It provides high crack bridging. It has excellent covering and is adhesive to surface. It has high thermal resistance and can be used between +80°C and 200°C. The film applied keeps its flexibility down to – 40 °C.
PUR PRIMER 1K
PUR Primer 1K: is a low viscosity single component solvent based moisture cure polyurethane primer especially formulated to significantly enhance the adhesion of polyurethane Range of waterproofing coatings and polyurethane joint sealants , with the most common construction substrates. PUR Primer 1K can be also used as a sealer and dust-proofed over dry and damp concrete substrates.
PURE POLYUREA
PURE POLYUREA: is a solvent free , two-component, fast curing, spray able, aromatic coating suitable for waterproofing, protection and sealing in general. It is made up of two high reactive liquid components, isocyanates and amines, which are mixed together using specific spray equipment, to form an aromatic, continuous, seamless, high density, solid and elastic pure polyurea membrane, with high
mechanical and chemical resistance qualities. The product has been especially designed to protect and coat concrete, metal, wood, ceramic, geotextile surfaces. The product reacts within seconds and once cured, leaves a flexible, durable, tough surface. It’s extremely fast gel time makes it suitable for
applications down to -20 °C without special conditioning of the component resins and isocyanates.
SUPER ELASTIC PU BITUMEN POLYMER 2K
SUPER ELASTIC PU BITUMEN POLYMER 2K: is a two component, polyurethane-bitumen polymer modified and silane additive add it to it, liquid waterproofing material. It is a fast curing product and it forms a very elastic film, which perfectly adhere to different surfaces. It is perfectly adhesive to almost all types of surfaces. It has excellent mechanical characteristics providing high tension, tearing and wearing resistance. It has excellent chemical resistance. Moreover, does not affected by water vapor transmission. The dry film of the product has the capability to breath and prevents the accumulation of humidity under the coat. It provides thick coating without bubbling. It provides high crack bridging. It has excellent covering and is adhesive to surface. It has high thermal resistance and can be used between +80°C and 200 °C. The film applied keeps its flexibility down to – 40 °C.
TRANSPARENT PU TOP COAT
TRANSPARENT PU TOP COAT: Two-component polyurethane based and elastic, hard waterproofing product. Especially used in waterproofing of glazed tiles and glossy surfaces such as ceramics, marble, granite and glass; After drying, it forms a transparent, tough elastic and seamless layer. It is used for waterproofing without damaging the existing coating especially in living places such as balconies and
terraces.