Cement-based crystallized mortar in powder form, made of specifically selected fine aggregates and chemicals activated by water and moisture. It is applied in positive and negative directions and the chemicals it contains penetrate into the concrete in depth by reacting with moisture and free lime present in the concrete, and forms crystals that do not dissolve in capillary voids and pores.
Usage areas:
Application Areas: Positive Water Pressure: The product is used in water Tanks , Swimming pools , Isolation of retaining walls and shear walls , irrigation canals , sewer system pipes, concrete pipes & manholes, dams , and cisterns.
Negative Water Pressure: interior isolation of basement walls and grounds, exterior isolation of water tanks, retaining walls, tunnels, subways, floors and horizontal joints, and elevator excavation.
Application Details:
The application surface must be clear of materials which prevent bonding, such as dust, oil, paint, curing agents, detergents, mold release oils, silicone, and has to be moisturized. Weak parts of the concrete must be repaired, plasters that are not adhering well must be removed, the surface must be shaped flat and sound, static cracks on the building must be repaired with plaster with Hayperflex Latex or HYPER REPAIR MORTAR. The application surface must be saturated with water and must be kept moist during application.
Application prohibitions:
- Avoid application in temperatures below +5°C and above +35°C.
- Avoid application on frozen areas, on areas under risk of freezing in 24 hours or on areas open to direct sunlight or wind.
- Never attempt to extend the expired mortar by adding powder and water. To maintain the consistency of the mortar during the application mix it often.
- The degree of formation of crystal and penetration depends on the density of the concrete and the absorbency of the surface.
- In order to avoid non-decorative aspect of the crystals formed by HAYPER CRISTALIZE-1K, plaster must be applied on it when it is still wet, and the paint must be applied on the plaster. In the case of ceramic or tile applications, ceramic adhesive must be applied directly on freshly applied HAYPER CRISTALIZE-1K. If these applications will be made on HAYPER CRISTALIZE-1K that is cured, crystals on the surface must be wiped off with diluted hydrochloric acid or bleach before the plaster. Wiping process only removes the crystals on the surface but does not inflict damage on the crystals penetrated inside the concrete.
