It is a hydraulic cement and polymer modified insulation material and floor coating. The resistant to positive and negative water pressure. The product have well resistant to abrasion. It is not toxic. Ideal for water tanks. The product have high flexibility and breath-ability. The product is easy to apply. It has high mechanical resistance against abrasion and impacts. The product have well resistant to salt water, grease and oil, but also impermeable.
Usage areas:
Terrace and roof insulation, basic and Curtain insulation, water tank, swimming pool, ornamental pools, in wet areas, bathrooms and balconies, walkways, park and garden grounds, Parking lots, asphalt roads, factory and warehouse floors, in ponds and cisterns, on old or problematic insulations.
Application Details:
On dry floors, the concrete surface should be moistened or primed with a universal acrylic primer. B component is opened by mixed with 1-1.5 kg of fresh water is added and then A component is added slowly with the help of low speed drill is mixed until there is no lump. The prepared mixture is applied to the surface by roller brush or spraying in 2 coats. The second coat should be applied before the first coat is completely dry. If desired, a thin coat can be applied with a brush or roller over the trowel application. The application of each layer should be perpendicular to the previous one, and should be completed at one time.
Application prohibitions:
- Avoid application in temperatures below +5°C and above +35°C.
- Avoid application on frozen areas, on areas under risk of freezing in 24 hours or on areas open to direct sunlight or wind.
- Never attempt to extend the expired mortar by adding powder and water. To maintain the consistency of the mortar during the application mix it often.